The AR-15 is perhaps the most dynamic and customizable weapon system on the free market today. The amount of gear you can slap on this war horse is almost endless and can become pretty pricey, but how much do you really need to improve how your weapon handles? The truth is that you only need 5 pieces of gear (most relatively cheap) to instantly improve your AR; a sling, foregrip, buffer, buffer spring, and a muzzle break. Before you go investing in that spendy ACOG or EOTech you've been eyeing, try these products first.
The Sling (APRX $30):
The sling is commonly associated as being the means by which you carry your weapon, but if utilized correctly it can provide support to counter the recoil. While slings come in multiple makes and models, I prefer the 2-point slings because of their versatility and simplicity. I’ve ran with the Viking Tactics 2-point sling for years and I love it! To turn your sling into a support base for your shooting position, all you have to do is tighten it to reduce the play in your rifle when aiming down the sights. When preparing to shoot, you should be using a little muscle to keep the sights steady. This is when you know that you have a steady base to shoot from.
The Foregrip: (APRX $65):
Adding a fore grip to your AR-15 will instantly provide you with a steady place to put your support hand on to allow for faster sight acquisition and stability. I am a huge fan of the Tango Down stubby vertical grip. I feels more natural in the hand and the bottom unscrews to allow for storage of extra batteries for electronics. If you do not like the vertical grips, Magpul makes an angled grip that relieves wrist strain for those who prefer not to install traditional foregrips. This is a simple part that takes approximately a minute to install and can benefit the shooter almost immediately. I talk more about the proper use of the foregrip in my post, You're Using Your Foregrip Wrong! Here's Why...
The Buffer (APRX $20-30)
Here is where it starts getting fun because this is a quick swap that will noticeably reduce your recoil the next time you shoot. The manufacturer's buffer, in my opinion, is just a little too light. Installing a heavier buffer will reduce the amount of force being thrown back at you when you shoot since there is more resistance because of the increased weight. If you look at the flat end of it in a Colt AR-15 for example, you will probably see something to the effect of “H1.” This is the lightest buffer they install in their AR's. The next heaviest buffer plug would be the H2. They do make H3 buffers that are the heaviest, but I would shy away from these as they have just a little too much weight for the common AR-15. There are a few other buffer out there, but the one I prefer is the Spike's ST-T2 buffer because it uses tungsten powder as opposed to weights. Just a personal preference, but I am happy with it's results.
The Buffer Spring (APRX $8)
Of course with your heavier buffer, you are going to need a better buffer spring to go along with it. I'll save you all hours of researching and tell you to just go with the Sprinco Blue Spring. This is just strong enough to counter the added weight without causing cycling issues. To date I have put around 3,000 rounds through my AR-15 using the Blue Spring, and I've yet to have ANY issues with it. I have heard of some people using their Red Spring, which is heavier, but I don't see a need for any extra resistance that could cause malfunctions. Even if you don't plan on getting a heavier buffer, the buffer spring needs to be replaced eventually, so take my advice and get yourself a Sprinco Blue Spring.
The Muzzle Break ($135-165):
Muzzle breaks come in many forms from multiple manufacturer's (I'm currently running the SureFire MB556K on mine and I love it!) but they are all intended to reduce the recoil for fast follow-up shots. This is the only part I have listed here that you may consider pricey depending on your budget, but unlike all the other goodies I've talked about, this is the one mod that will drastically boost your shooting performance. Muzzle Breaks are fairly easy to install given the right equipment such as the Hammerhead Rifle Tool. Simply unscrew the existing muzzle break, add the necessary washers, apply a little lock tight, and screw your new break on. This is the most crucial product you will need if your aim is to minimize the felt recoil of your rifle. It makes the weapon a dream to shoot and your follow up shots will dramatically improve!
By installing this equipment on your AR-15, you will be well on your way to better shooting and sitting on Cloud 9 in control heaven! I hope that the named gear suggestions I have made will help you in your search and that the next time you are at the range you will have a better confidence in your weapon and shooting ability.
No comments:
Post a Comment